Q: How much weight will the Pakit Rak / Receiver Carry?
A: The Pakit Rak is designed to carry a maximum of 25 lbs. which includes the weight of the bag.  Never exceed the maximum weight limit  as stated by your motorcycle manufacturer.

Q: Will the Pakit Rak carry more weight if I use a trailer hitch?
A: Yes: refer to the hitch manufacturer's weight limitations.  Never exceed 45 lbs which is the Rak maximum weight limitation.

Q: Are there any handling issues when using the Pakit Rak?
A: No.  The handling is unchanged as long as you do not overload the motorcycle.  Also make sure you don't have loose heavy items in the luggage bag that may move as your cornering.

Q: Is the luggage bag water proof?
A: No. The bag is water resistant and will absorb water if left in the rain; however we provide a waterproof rain cover with ervery Pakit Rak system we sell which will protect the luggage from rain and sun as well as keep the luggage clean from road grime.

Q: How long does it take to install the Pakit Rak Receiver Brackit?
A: On average about 30 to 45 minutes depending on skill level.  Most customers are able to install in 45 minites or less.

Q: Are there special tools required to install the Receiver Brackit?

A: You will need a Roto Zip™ Bit to cut the 1" square hole for the receiver brackit.  You can purchase one of these at most hardware stores.  The one we use is a 1/8" diameter and can be used in any ¼" drill motor or dremel tool™.

Q: What models will Pakit Rak fit?

A: Currently the Pakit Rak is designed to fit primarily Goldwings GL1200, GL1500 & GL1800 and most Trikes.  Pakit Rak will fit a lot of other motorcycles as well as long as they have a trailer hitch.

Q: What are Rubber Baby Buggy Bumpers (RBBB's)?

A: They are bumpers designed to support the GL1800 trunk lid and eliminate the rattle and chaffing that occurs on all GL1800.

Q: How hard is it to install the Rubber Baby Buggy Bumpers (RBBB's)?

A: Not hard at all.  We provide a full size template and detailed instructions telling you just what to do.

Q: Do I have to drill holes to mount the RBBB's?

A: Yes, 4 each ¼" diameter holes but is very easy using the provided template.